Soal - soal ini berdasarkan dari soal MTCRE
Soal - soal ini dimaksudkan untuk latihan dan untuk dipelajari. Jawaban dari soal-soal ini belum tentu semuanya benar, apabila ada jawaban yang keliru, mohon diberitahu pada kolom komentar
Selamat mengerjakan, semoga lulus ujian dan semoga tetap istiqomah semangat belajarnya :)
1.There can be more than one PPPoE
server in a single broadcast domain:
0/4
True
False
2. ECMP provides:
4/4
A. per packet load balancing to
multiple gateways
B. per src address load balancing to
multiple gateways
C. per connection load balancing to
multiple gateways
D. per src/dst address pair load balancing to
multiple gateways
3.There are two routes in the
routing table:
4/4
A. 5.5.5.5
B. 5.6.6.6
C. the required route is not in the
routing table
D. both - half of the traffic will
be routed through one gateway, half through the other
4. Consider the following diagram.
We want to communicate from a device on LAN1 to a device on LAN2. Assuming that
all necessary configurations are already included on R2, which of the following
configurations in R1 would enable this communication?
0/4
A. /ip route add dst-address=192.168.1.0/24 gateway=192.168.99.2
B. /ip route add dst-address=0.0.0.0/0 gateway=192.168.99.2
C. /ip route add dst-address=0.0.0.0/0 gateway=Ether1
D. /ip route add dst-address=192.168.1.0/24 src-address=192.168.0.0/24 gateway=192.168.99.2
E. /ip route add dst-address=192.168.0.0/24 gateway=192.168.0.1
5. To securely bridge together 2
remote networks you can use
0/4
A. PPTP BCP
B. EoIP over PPTP
C. PPPoE over EoIP
D. PPTP over EoIP
6. /ip route configuration on router
:
4/4
A. 192.168.0.1
B. 192.168.0.3
C. 192.168.0.4
D. 192.168.0.2
7. In broadcast networks OSPF
depends on the following to function correctly.
0/4
A. TCP
B. Multicast
C. UDP
D. Broadcast
E. ICMP
8. The correct order for PPPOE
discovery stage is
0/4
A.Request, Initialization, Session
confirmation and Offer
B.Initialization, Offer, Request and Session
confirmation
C.Request, Offer, Initialization and
Session confirmation
D.Initialization, Session
confirmation, Request and Offer
9. A network administrator checks
the IP routing table (/ip route print) and notices that there are two different
routes (different /ip route entries) to the destination network 10.0.0.0/8. Each one has exactly one gateway (which is different to
the other) and both are active (flag A). What could cause this behaviour of 2
routing entries to the same network with both being active? (choose all possible
answers)
0/4
A. The administrator is using ECMP -
(they have added 2 static routes to the network to load balance with ECMP)
B. The routes have different 'routing-mark' parameters and belong to
two different routing tables
C. One of the routes is of type
'Static' and one is from OSPF, but they have the same distance
D. One of the routes is of type
'Connected' and the other one is of type 'Static'
Jawaban yang benar
B. The routes have different
'routing-mark' parameters and belong to two different routing tables
10. PPPoE server only works within
one Ethernet broadcast domain that it is connected to. If there is a router
between server and end-user host, it will not be able to create PPPoE tunnel to
that PPPoE server.
4/4
1. True
2. False
11. It is possible to filter ospf
routes within a single ospf area
4/4
1. True
2. False
12.You have a router with the
following IP addresses:
0/4
A. Set Ethernet 2 and 3 to passive
mode
B. Set Distribute-Connected=yes
C. Set OSPF Networks to 10.40.1.0/24,10.250.1.0/30, 10.251.1.0/30, 10.50.1.0/30,
and 10.50.2.0/30
D. Set Ethernet 1, 2, and 3 to passive mode
E. set distribute-default=always-type-1
F. Set OSPF networks to 0.0.0.0/0
G. Set OPSF networks to 10.0.0.0/8 only
H. set distribute-state=yes
I. Set OSPF Networks to 10.40.1.0/24, 10.250.1.0/30, 10.251.1.0/24, 10.50.1.0/30, and 10.50.2.0/30
J. Set OSPF networks, to 10.50.1.0/30, 10.50.2.0/30
13. In case it is not
administratively defined, how is OSPF Router ID determined?
0/4
A. The lowest IP address of any
interface included in OSPF
B. The highest IP address of any
interface included in OSPF
C. Random IP address from any
interface on the router
D. Random number
E. The lowest IP address of any interface on the
router
F. The highest IP address of any
interface on the router
G. Random IP addresses from any
interface included in OSPF
Jawaban yang benar
E. The lowest IP address of any
interface on the router
14. When using routing option
'check-gateway=ping' after how many timeouts is gateway considered unreachable:
4/4
A. 4
B. 3
C. 1
D.
2
15. Which routing table is used to
apply recursive routing at MikroTik RouterOS
0/4
A. It is possible in all the routing tables
installed in a router
B. It is not possible
C. It is only possible in the main
routing table
D. It is only possible on the x86
platform
16. A MikroTik system administrator
implemented OSPF Routing protocol in the network. But realized that he has a
static route on the routers. What can be done to make the static route work as
a failover whenever the dynamic routing protocol fails.
0/4
A. He should manually disable the
static routes and enable them whenever OSPF fails
B. Delete all static routes because
there is no way for it to work with OSPF
C. He should use
"netwatch" to trigger static routes whenever OSPF fails
D. He should increase the administrative distance
of the static route
17. An OSPF backbone area is only
necessary when more than one area is used on your network. Backbone area could
be removed, when only one area exists.
4/4
1. True
2. False
18.There are two routes in the
routing table:
0/4
A. none, because distance is >=
10
B. 10.20.20.20
C. 10.10.10.10
D. both
19. When using routing option
'check-gateway=ping' what is the ICMP echo request interval (in seconds)?
4/4
A. 20s
B. 60s
C. 30s
D. 10s
20.A routing table has following
entries:
0/4
A. 10.1.1.1
B. 10.1.5.126
C. 10.1.1.2
D. 25.1.1.1
21. In OSPF protocol, which
one of these router types are responsible for route distribution between
different Autonomous systems?
0/4
A. ASBR
B. IR
C. AS
D. ABR
22. When adding a static route,
you must always ensure that you add both the gateway and the interface.
4/4
1. True
2. False
23. Router A and B are
both running as PPPoE servers on different broadcast domains of your
network. It is possible to set Router A to use "/ppp secret"
accounts from Router B to authenticatePPPoE customers.
4/4
1. True
2. False
24. Which route will be
used to reach host 192.168.1.55?
0/4
A. Route via gateway 1.1.1.1
B. Route via gateway 2.2.2.2
C. Route via gateway 3.3.3.3
25. When sending out an ARP
request, an IP host is expecting what kind of address for ananswer?
4/4
A. VLAN ID
B.MAC Address
C. IP address
D. 802.11g
0 Comments