SOAL LATIHAN MTCNA CAPTER 4

                                                    CAPTER 4

Soal - soal ini berdasarkan dari soal MTCNA

Soal - soal ini dimaksudkan untuk latihan dan untuk dipelajari. Jawaban dari soal-soal ini belum tentu semuanya benar, apabila ada jawaban yang keliru, mohon diberitahu pada kolom komentar

Selamat mengerjakan, semoga lulus ujian dan semoga tetap istiqomah semangat belajarnya   :)

 

1. Choose the correct PCQ argument values to allow 256kbps maximum download and upload for each client:

4/4

A. kind=pcq pcq-rate=5000000 pcq-classifier=src-address

B. kind=pcq pcq-rate=256000 pcq-classifier=src-address

 

C. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address

D. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address

E. kind=pcq pcq-rate=256000 pcq-classifier=dst-address

 

 

2. You can control bandwidth of a client connected to AP with the resource / interface wireless access-list ( assume the client uses MikroTik RouterOS). 

0/4

1. TRUE

 

2. FALSE

 

 

3. Netinstall can be used to

0/4

A. Reinstall software without losing licence

B. Install different software version (upgrade or downgrade)

 

C. Install package for different hardware architecture

 

D. Keep configuration, but reset a lost admin password

 

 

4. Which is the default port of IP-Winbox?

0/4

A. TCP 8192

B. TCP 80

 

C. TCP 8291

D. UDP 8291

 

5. Which of the following Routes statuses are possible?

0/4

A. S = Static

B. D = Drop

C. A = Active

 

D. C = Connected

 

 

6. A RouterBOARD clock is configured in '/system clock'. The clock resets to default after each reboot. Select the best solution for the problem. 

0/4

A. Write a script in '/system script' to set the clock

B. Open the router and ensure the CMOS battery is fine

 

C. Configure '/system ntp server' and set a valid and reachable NTP client address

D. Configure '/system ntp client' and set a valid and reachable NTP server address

 

7. MikroTik RouterOS commands can be run once a day by:

4/4

A. /system scheduler

 

B. /system cron

C. /system watchdog

 

8. What is necessary for PPPoE client configuration?

4/4

A. Interface (on which PPPoE client is going to work)

 

B. ip firewall nat masquerade rule

C. Static IP address on PPPoE client interface

 

9. What is the minimal required wireless configuration to create an access point?

0/4

A. scan-list

B. DFS mode

 

C. band

D. mode

E. radio name

F. ssid

G. frequency

H. WDS

 

10. What can be used as "Target" in the simple queue?

4/4

A. Server IP address

B. Client MAC address

C. Address list name

D. Client IP address

 

 

11. RouterOS log messages are stored on disk by default

4/4

1. TRUE

2. FALSE

 

 

12. PPPoE server only works within one Ethernet broadcast domain that it is connected to. If there is a router between server and end-user host, it will not be able to create PPPoE tunnel to that PPPoE server.

4/4

True

 

False

 

13. Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect? 

0/4

A. Default Forward

 

B. Default Authenticate

C. Enable Access List

D. Security Profile

 

14. Mark all correct statements about command 'export file={name of the script file}' :

0/4

A. Full configuration of the router (without RouterOS user passwords) can be exported

B. Only part of the configuration (for example /ip firewall) can be exported

C. Log entries from /log print can be exported

D. Export files can not be edited

 

 

15. Possible actions of ip firewall filter are:

0/4

A. bounce

B. accept

 

C. tarp

D. add-to-list

E. log

F. tarpit

 

16. Mark all correct answers about wireless:

0/4

A. /ip firewall filter allows to deny authentication to the AP

B. Forwarding between clients can be enabled by using wireless access-list

C. Wireless access-list on the access point (AP) can be used to allow or deny client connection to your AP

 

D. The only way to prevent wireless client connections is to disable wireless interface

 

 

17. How many different priorities can be selected for queues in MikroTik RouterOS?

0/4

A. 1

 

B. 16

C. 8

D. 0

 

18. Which of the following is true for connection tracking

0/4

A. Enabling connection tracking reduces CPU usage in RouterOS

B. Disable connection tracking for mangle to work

 

C. Connection tracking must be enabled to be able to use all firewall features

D. Connection tracking must be enabled for NAT'ed network

 

 

 

19. PPP Secrets are used for

0/4

A. L2TP clients

 

B. PPP clients

C. Router users

D. PPtP clients

 

E. PPPoE clients

 

F. IPSec clients

 

20. Which port does PPTP use by default?

0/4

A. TCP 1721

B. TCP 1723

C. UDP 1721

D. UDP 1723

 

 

21. To use masquerade, you need to specify

4/4

A. action=masquerade, in-interface, chain=src-nat

B. action=masquerade, out-interface, chain=src-nat

 

C. action=accept, out-interface, chain=src-nat

D. action=masquerade, out-interface, chain=dst-nat

 

22. The 'check-gateway' option is enabled for one route. Select all statements that are true:

A. Gateway is checked every 10 seconds and after 2 failures, the gateway is considered unreacheable

 

B. In case of failure of the gateway, routes pointing to that gateway will become inactive

C. Check gateway option can be configured for Ping, ARP and RARP (reverse ARP)

D. Gateway is checked every 10 seconds and after a single failure, the gateway is considered unreacheable

 

 

23. /ip route configuration on router, :

4/4

A. 192.168.0.2

B. 192.168.0.3

C. 192.168.0.4

D. 192.168.0.1

 

 

24. How long is level 1 (free) license valid?

0/4

A. 24 hours

 

B. 1 month

C. Infinite time

D. 1 year

 

 

25. What does the firewall action "Redirect" do? Select all true statements.

0/4

A. Redirects a packet to a specified port on the router

B. Redirects a packet to the router

 

C. Redirects a packet to a specified port on a host in the network

 

D. Redirects a packet to a specified IP